MX68W - LAN access for wireless clients

Solved
Craig_H
New here

MX68W - LAN access for wireless clients

Hello,

We are using an MX68W for a small contractor trailer so the build-in wireless on the MX is plenty, we don't need any MR's.  My question is, how do we allow wireless clients to see wired devices, such as printers?

 

Typically we do this in the Wireless > Firewall & Traffic Shaping menu which does not exist in this case.

 

Appreciate any help. 

1 Accepted Solution
Craig_H
New here

It looks like we were able to resolve the issue with a firmware update and restart of the MX.

View solution in original post

7 Replies 7
ConnorL
Meraki Employee
Meraki Employee

So long as you don't have any firewall rules configured, they should be able to access them without any additional config. 

Craig_H
New here

We don't have any rules configured on this firewall but wireless users can't see printers, yet wired can.

ww
Kind of a big deal
Kind of a big deal

Wireless users are in the same vlan as wired users?

Craig_H
New here

Yes

cmr
Kind of a big deal
Kind of a big deal

The first SSID on MRs has local LAN access disabled, I've not used an MX with wireless, but check that the SSID isn't blocking LAN access.  For MRs it is under Wireless/Firewall & Traffic Shaping 

Craig_H
New here

Yeah, this one isn't using MR's though, wireless is configured through the security appliance.

Craig_H
New here

It looks like we were able to resolve the issue with a firmware update and restart of the MX.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels