MX68W - LAN access for wireless clients

[Craig_H]

Hello,

We are using an MX68W for a small contractor trailer so the build-in wireless on the MX is plenty, we don't need any MR's.  My question is, how do we allow wireless clients to see wired devices, such as printers?

Typically we do this in the Wireless > Firewall & Traffic Shaping menu which does not exist in this case.

Appreciate any help. 

[ConnorL]

So long as you don't have any firewall rules configured, they should be able to access them without any additional config. 

[Craig_H]

We don't have any rules configured on this firewall but wireless users can't see printers, yet wired can.

[ww]

Wireless users are in the same vlan as wired users?

[Craig_H]

Yes

[cmr]

The first SSID on MRs has local LAN access disabled, I've not used an MX with wireless, but check that the SSID isn't blocking LAN access.  For MRs it is under Wireless/Firewall & Traffic Shaping 

[Craig_H]

Yeah, this one isn't using MR's though, wireless is configured through the security appliance.

[Craig_H · Accepted solution]

It looks like we were able to resolve the issue with a firmware update and restart of the MX.