MX68 to MX105 configuration transfer

[Amadou_MR]

Hello

We have an MX68 in production and have acquired a new MX105, how can we transfer the configurations from the old to the new MX?

THANKS

[alemabrahao]

Take a look at the documentation.

https://documentation.meraki.com/MX/Other_Topics/MX_Cold_Swap_Replacing_an_Existing_MX_with_a_Differ...

[Brash]

As per the provided documentation, it's a relatively trivial process.

Most of the configuration is pulled down to the new MX after replacement. Only things like port specific configuration and Site-to-site VPN config will have to be re-configured.

[PhilipDAth]

The above comments are excellent.  The one thing I'll mention is any WAN traffic shaper you have configured on the MX68 (under Security & SD-WAN/SD-WAN & traffic shaping) will be kept - whereas you often want to use the higher performance option offered by the MX105.

[AnythingHosted]

Took my longer than I care to admit to work this out in swapping MX84 for MX75