Products
Platform
General
Public groups
Is there a way to do a Site-to-Site with MX67 at both end for extend a Layer 2 ?
Solved! Go to solution.
Or to put what @Nick said another way: No, the MX can't do Layer 2 tunnels 🙂
View solution in original post
Hi @LouisPaquin
With the subnets you've mentioned, you'd end up with two LAN's on the same subnet. The MX would not know to route the traffic over the site to site.
You would be better served by creating separate subnets for this sort of setup
Hi @Nick,
I know it would be easier to do it like you said but, I need to extend the Lan 10.175.69.132/30 from site A to site B.
So sad, thanks to both of you @jdsilva & @Nick
@jdsilva 😄