MX67 Site-to-Site for extend Layer 2.

[LouisPaquin]

Is there a way to do a Site-to-Site with MX67 at both end for extend a Layer 2 ?

[Nick]

Hi @LouisPaquin 

With the subnets you've mentioned, you'd end up with two LAN's on the same subnet. The MX would not know to route the traffic over the site to site.

You would be better served by creating separate subnets for this sort of setup

[LouisPaquin]

Hi @Nick,

I know it would be easier to do it like you said but, I need to extend the Lan 10.175.69.132/30 from site A to site B.

[jdsilva · Accepted solution]

Or to put what @Nick said another way: No, the MX can't do Layer 2 tunnels 🙂

[LouisPaquin]

So sad, thanks to both of you @jdsilva & @Nick 

[Nick]

@jdsilva 😄