MX65W Cellular Failover

SOLVED
TTaylor
Comes here often

MX65W Cellular Failover

Updated the MX65w with the 15.42.1 firmware and now my AT&T USB800 modem can not be detected by the MX appliance. Also AT&T stop selling the Velocity usb stick that actually work on the mx appliance and replace it with the USB800 stick. 

1 ACCEPTED SOLUTION
Inderdeep
Kind of a big deal
Kind of a big deal

@TTaylor Well AT&T USB800 is not supported as per the sheet. May be reach out to your Meraki Account manager for this to understand more.

https://documentation.meraki.com/MX/Cellular/3G%2F%2F4G_Cellular_Failover_with_USB_Modems 

Inderdeep_0-1625171265023.png

 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com

View solution in original post

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

The USB sticks are becoming problematic in many countries.  I try to use the cellular gateways now.

https://meraki.cisco.com/product/cellular/integrated-antenna/mg21/ 

Inderdeep
Kind of a big deal
Kind of a big deal

@TTaylor Well AT&T USB800 is not supported as per the sheet. May be reach out to your Meraki Account manager for this to understand more.

https://documentation.meraki.com/MX/Cellular/3G%2F%2F4G_Cellular_Failover_with_USB_Modems 

Inderdeep_0-1625171265023.png

 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels