MX64 WAN2 router management connection when in 'ready' state

SOLVED
DanielP9
Here to help

MX64 WAN2 router management connection when in 'ready' state

Hi,

 

I have installed an MX64 with BT DSL on WAN1 and 4G LTE Router on WAN2. All works well and the failover is automatic as expected. My issue is that when WAN1 is "active" and WAN2 is "ready" (the normal state) I can't connect to the 4G router management page to check it is working. Is this by design or can the routing be changed to allow this?

 

Thanks for any help

Peter.

1 ACCEPTED SOLUTION
CptnCrnch
Kind of a big deal
Kind of a big deal
3 REPLIES 3
CptnCrnch
Kind of a big deal
Kind of a big deal

Yes, this does seem to solve the problem.

Thank you.

 

CptnCrnch
Kind of a big deal
Kind of a big deal

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels