MX250 to ASA5525 Site to site VPN : Help

NaveedRana
New here

MX250 to ASA5525 Site to site VPN : Help

hi every one. 

just need to know the configuration of site to site vpn from mx250 to ASA5525 at data centre.

3 REPLIES 3
Inderdeep
Kind of a big deal
Kind of a big deal

@NaveedRana : Check out the below article 

https://documentation.meraki.com/MX/Site-to-site_VPN/MX_to_Cisco_ASA_Site-to-site_VPN_Setup

 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com

i tried nat 0 access-list command / not working

 

Well, what else have you tried? The config mentioned is quite clean. Just give us some chance to help you.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels