MX250 - 802.1X Auth

SOLVED
RaphaelL
Head in the Cloud

MX250 - 802.1X Auth

 Hi ,

 

Does anyone know if MX250 / 450 ( on any firmware versions ) are supporting 802.1X / Hybrid Auth ?

 

I don't see the option on the adressing and vlans page. It might be restricted in the backend. 

RaphaelL_0-1643312953791.png

 

 

Thanks , 

 

 

1 ACCEPTED SOLUTION
RaphaelL
Head in the Cloud

Confirmed by Meraki : Unfortunately at this time only the MX64/65(W), MX67/68(C/W), and Z3 models of security appliance support 802.1X auth on the local LAN ports

View solution in original post

7 REPLIES 7
Inderdeep
Kind of a big deal

@RaphaelL : check this out for hybrid Auth

https://documentation.meraki.com/MX/Access_Control_and_Splash_Page/MX_Access_Policies_(802.1X) 

Regards
Inderdeep Singh
www.thenetworkdna.com ( Awarded by Cisco IT Blogs award 2020)

Yes , we already have hybrid auth on our MX64, 65 , 68 .

 

This page lists these devices : MX64/65(W) and MX67/68(C/W) and Security Appliances, as well as Z3(C) but not the 250 and 450.  I would be surprised to learn that it is not supported since the cheap hardware on a MX64 can do it.

ww
Kind of a big deal
Kind of a big deal

Mx 64 65 etc are devices also directly serving user/client devices.

 

Mx85 and up are more likely to sit in mer just doing routing/sdwan.  With some switches connected to it. 

Inderdeep
Kind of a big deal

No document around if it is there in MX250 !

Regards
Inderdeep Singh
www.thenetworkdna.com ( Awarded by Cisco IT Blogs award 2020)
CptnCrnch
Kind of a big deal

8021.x is restricted to the smaller, more "office" oriented MX series like MX64, Z3 etc.

RaphaelL
Head in the Cloud

Confirmed by Meraki : Unfortunately at this time only the MX64/65(W), MX67/68(C/W), and Z3 models of security appliance support 802.1X auth on the local LAN ports

Inderdeep
Kind of a big deal

Yeah that was what Meraki put the document around with MX64/65(W), MX67/68(C/W), and Z3 models only.

Regards
Inderdeep Singh
www.thenetworkdna.com ( Awarded by Cisco IT Blogs award 2020)
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels