MX250 - 802.1X Auth

[RaphaelL]

 Hi ,

Does anyone know if MX250 / 450 ( on any firmware versions ) are supporting 802.1X / Hybrid Auth ?

I don't see the option on the adressing and vlans page. It might be restricted in the backend. 

Thanks , 

[Inderdeep]

@RaphaelL : check this out for hybrid Auth

https://documentation.meraki.com/MX/Access_Control_and_Splash_Page/MX_Access_Policies_(802.1X) 

[RaphaelL]

Yes , we already have hybrid auth on our MX64, 65 , 68 .

This page lists these devices : MX64/65(W) and MX67/68(C/W) and Security Appliances, as well as Z3(C) but not the 250 and 450.  I would be surprised to learn that it is not supported since the cheap hardware on a MX64 can do it.

[ww]

Mx 64 65 etc are devices also directly serving user/client devices.

Mx85 and up are more likely to sit in mer just doing routing/sdwan.  With some switches connected to it. 

[Inderdeep]

No document around if it is there in MX250 !

[CptnCrnch]

8021.x is restricted to the smaller, more "office" oriented MX series like MX64, Z3 etc.

[RaphaelL · Accepted solution]

Confirmed by Meraki : Unfortunately at this time only the MX64/65(W), MX67/68(C/W), and Z3 models of security appliance support 802.1X auth on the local LAN ports

[Inderdeep]

Yeah that was what Meraki put the document around with MX64/65(W), MX67/68(C/W), and Z3 models only.