MX warm spare with one ISP connection

nikmagashi
Getting noticed

MX warm spare with one ISP connection

Hi,

 

We are going to implement MX warm spare with two MX:es but we have only one ISP connection. I have checked a little on meraki docs but I can't find any design which cover this. We have two MX:es and two MS:es. So my thought on this is that I use a special vlan on the switches for wan interface, like I would dedicate port 1and 2 on both switches for ISP vlan and then connect that one ISP on one of these ports. Not so redundant but is this something that will actually work with Meraki?

 

nikmagashi_0-1633732440675.png

 

2 REPLIES 2
ww
Kind of a big deal
Kind of a big deal

Re: MX warm spare with one ISP connection

nikmagashi
Getting noticed

Re: MX warm spare with one ISP connection

Ok, so I just need to tag the ports on the switches and no need for the vlan to be created on the MX:es (Addressing and vlans).

 

Do you think the cabling is ok?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels