Dear Meraki Friends,
I am trying to find a way to allow multiple IP’s to route from a single public IP address.
The situation is that we have a number of clients servers who have whitelisted a public single IP so we can access there servers so I know I can make 1 LAN IP appear externally as a public IP using 1:1 NAT but I have multiple users (devices) that need to do this potentially as the same time, anyone got any idea’s on how I can do this or any other suggestions.
Thanks
Gary
Yes, thanks
If all the client devices are behind the MX/Device gateway performing NAT, just put all the clients into a specific VLAN and then create a group policy on that VLAN to be routed out of the WAN 2 uplink (Which has the specific whitelisted public IP).
WANKiller, thanks for this, I think what complicated matters is that the ISP issues a dynamic IP for the WAN interface (PPPOE) but have issues a subnet which is routed, via this dynamic IP. one of the public IP's that have been allocated is the whitelisted IP to the remote servers.
I can't think of anyway to solve this one. You can do inbound 1:many, but not outbound many:1 NAT.