MX VPN Routed

[sjlee]

When configuring LAN ports on MX equipment operating in Routed mode, only subnet/IP addresses can be set in the Single LAN option, and subnet/IP addresses/port can be set in the VLANs option, but the port can only be set in trunk/access mode.

Is it impossible to set the LAN port as L3 Routed Port?

I tried searching for Routed port settings on MX equipment, but I can't check the similarities.

Please answer it.

Thank you,

Best Regards.

[ww · Accepted solution]

https://documentation.meraki.com/MX/Networks_and_Routing/MX_Layer_2_Functionality

Mx does not support L3 ports on lan.

You can use vlan SVI , attached to a access port.