MX VPN Concentrator behind small MTU network

SOLVED
mat1458
Getting noticed

MX VPN Concentrator behind small MTU network

I have a one-armed MX VPN Concentrator that is located in a site that is connected over a network with an MTU of 1440. Is there a way to build a Teleworker VPN solution (MR AccessPoint SSID Tunneling) from other sites to this VPN concentrator? Is there a way to reduce the MTU on the MX or to switch on PMTUD in a way that the MX and the AccessPoint both reduce the size of the IP packets?

 

1 ACCEPTED SOLUTION
jdsilva
Kind of a big deal

If you call support they can modify the MTU of the MX interfaces for you. It is not exposed in the dashboard for you to do yourself. 

 

 

View solution in original post

3 REPLIES 3
jdsilva
Kind of a big deal

If you call support they can modify the MTU of the MX interfaces for you. It is not exposed in the dashboard for you to do yourself. 

 

 

Thanks for the reply!

jdsilva
Kind of a big deal

No problem! Good luck with your config 🙂

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels