cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MX Templates and Traffic Shaping

Highlighted
Getting noticed

MX Templates and Traffic Shaping

Is it possible to configure templates for MX firewalls and also have the ability to add traffic shaping configuration on the MX firewall it self.
Within the templates we have devices which connected to locations with different bandwidth and Traffic Shaping/QoS needs. This is the reason to have different traffic shaping configuration for the locations MX Firewalls within the templates.

 

Thanks,

3 REPLIES 3
Highlighted
Kind of a big deal

Re: MX Templates and Traffic Shaping

When a network is bound to a configuration template you can only configure uplink traffic shaping on a "per network" basis. You can't configure traffic shaping of individual traffic types per network - only in the overall template which affects all sites.
Highlighted
Meraki Employee

Re: MX Templates and Traffic Shaping

They pushed an MX template enhancement last week that allows child MX networks' uplink bandwidth sliders to override the template uplink settings. This unlocks the ability to optimize the WAN bandwidth settings on a per-site basis.

 

That might solve most of your issue.

 

mx template uplink overrides.gif

 

 

 

Highlighted
Getting noticed

Re: MX Templates and Traffic Shaping

The option I was looking for, is for the configuration of traffic shaping of individual traffic types per network. Not only the uplink traffic shaping.

 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.