MX SD wan and Maximum number of branch support?

SOLVED
Abhishek7310
Just browsing

MX SD wan and Maximum number of branch support?

I need to deploy MX devices in place of MPLS line to reduse the cost

 

there is one HO with 70 Systems and 30 branch (each 5 to 10 system)

 

I'm totally looking for SD wan solution in Meraki

 

Suggest me which device should i go for i shortlisted 4 devices and also wants to know whats the maximum HO  to branch conectivity for SD Wan?

 

For Small Branch

MX64

MX67

 
Medium Branch or HO
MX84
MX100

 

pl advice

 

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

This is the MX sizing guide:

https://meraki.cisco.com/lib/pdf/meraki_whitepaper_mx_sizing_guide.pdf 

 

The MX84 will be fine for your head office.

 

I tend to use either MX67 or MX68 for small sites.

The advantage of the MX68 is it has a 10 port LAN switch built-in (and two of those ports are PoE).  So if your site has fewer than 10 devices to plug in you don't need a separate switch.

View solution in original post

2 REPLIES 2
PhilipDAth
Kind of a big deal
Kind of a big deal

This is the MX sizing guide:

https://meraki.cisco.com/lib/pdf/meraki_whitepaper_mx_sizing_guide.pdf 

 

The MX84 will be fine for your head office.

 

I tend to use either MX67 or MX68 for small sites.

The advantage of the MX68 is it has a 10 port LAN switch built-in (and two of those ports are PoE).  So if your site has fewer than 10 devices to plug in you don't need a separate switch.

DarrenOC
Kind of a big deal
Kind of a big deal

Hi @Abhishek7310 , what connectivity do you have at your Head Office\Data Centre? I would consider the MX250 as there isn’t that much of a price jump from the MX100 to the MX250 especially if your Cisco Partner has deal registered this for you. Just my 2 cents

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels