MX - NAT

Shaik
New here

MX - NAT

Hi,

 

I have assigned public IP on WAN interface of MX. We have multiple VLANs in the network. 

Now all the vlans are natted to internet with WAN interface IP. I want each vlan to nat with a different public IP (of same WAN interface range). Below is how i needed.

 

MX WAN IP - 1.1.1.1

 

LAN SUBNET 1 (10.0.0.0/24) - 1.1.1.2

LAN SUBNET 2 (10.1.0.0/24) - 1.1.1.3

LAN SUBNET 3 (10.2.0.0/24) - 1.1.1.4

 

Kindly advise how to acheive this.

 

Thanks.

3 REPLIES 3
ww
Kind of a big deal
Kind of a big deal
AjitKumar
Head in the Cloud

Hi Shaik,

I understand we cannot NAT a complete VLAN with a public IP.

However NATTING 1 Private IP Address against 1 Public IP Should be possible.

You may check the following threads

https://meraki.cisco.com/blog/2014/08/1many-nat-for-meraki-mx/

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Firewall_Settings

 

Regards,
Ajit
AjitsNW@gmail.com
www.ajit.network
Ryan_Miles
Meraki Employee

The things mentioned above are all for inbound NAT. The OP wants outbound NAT flexibility. We haven't released Source NAT yet. Not sure when it will become available.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels