MX-68: remove subnet IP VLAN 1

[FDM]

Hello,

How can i remove the subnet configured on VLAN 1?  

I cannot set it to empty then i get an error VLAN must be in IP address range CIDR format.

I do not want to assign an IP address to VLAN 1 that is what i am trying to accomplish.

The native VLAN can remain on 1.

Kind regards,

Frederik.

[ww]

Not possible. 

How about you remove it and set drop untagged on the trunk port

[FDM]

Hi,

It does not allow me to remove it. 

[GIdenJoe]

Then set the other VLAN to native 😛

[GIdenJoe]

Make sure you have another VLAN interface on the MX and delete the VLAN 1 interface afterwards.

[FDM]

Hi Joe,

This is what I did but is not possible i think due to the faxt the native vlan is set to 1. 

[PhilipDAth]

Give it a non-routable link-local address.  Like 169.254.0.1/30.