MX 450 Install and config

[BigK]

Hello, 

I am new to MX 450 install and config. I am tasked with install of 450 mx at the data center. 

My plan is to

1 - connect a laptop to management port and brows to the setup url.

2- Enter the WAN IP address

3- The MX will be connected to a switch 

4 - Wan 1 will be configured as dynamic to receive dhcp from dhcp server

5- Enter the DNS config

New network is already crated on dashboard as well as the enterprise key and read the installation Guide here.

MS450 Series Installation Guide - Cisco Meraki

Any other tutorial or help will be appreciated.

Thanks

I think with that I should be enough to access the MX remotely and continue with the installation and configuration 

[alemabrahao]

It's the correct install guide:

https://documentation.meraki.com/MX/MX_Installation_Guides/MX450_Installation_Guide

Take a look at these guides:

https://documentation.meraki.com/MX/Deployment_Guides