Issue with VPN limiting access to certain IPs

SOLVED
John_D
Here to help

Issue with VPN limiting access to certain IPs

Hi,

 

I've done some searching but have not found what I am experiencing. 

 

I have a MX64 set up in the most basic of terms for VPN. 

 

I have NAT on and the VPN for clients is enabled with a secret. Authenticating is via a Meraki account. Connecting is not a issue.

 

When I VPN in I cannot get to all my IP addresses.

 

The main network is 192.168.1.xxx.

 

The VPN network is 192.168.2.xxx.

 

I have a VMware server that has an IP of 192.168.1.8. But I cannot access it. I have to remote to another computer on the network to access it. The same is true with some raspberry pi's. I can get to one pi at 192.168.1.41 but I cannot hit 1921.68.1.42. My main switch (which is a Dell) at 192.168.1.50 is not accessible. 

 

But if I remote control a Windows client I can get to everything.

 

I have no rules for limits or restrictions set up.

 

I simply want to access my home network from anywhere and hit all my nods.

 

As of a few days ago, I used to be able to access 192.168.1.8 but now I cannot and do not understand why it is being denied over VPN.

 

I have tried this from work, a cellular hot spot, and my android cell phone.

 

Any ideas?

 

Thank you for you help in advance!

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

On the 192.168.1.x devices there are likely to be one of two errors:

* Wrong subnet mask

* Wrong default gateway

 

Double check those two settings.

View solution in original post

3 REPLIES 3
PhilipDAth
Kind of a big deal
Kind of a big deal

On the 192.168.1.x devices there are likely to be one of two errors:

* Wrong subnet mask

* Wrong default gateway

 

Double check those two settings.

Dennis_S
Here to help

John_D,

 

this is sounds like a default gateway or subnet mask mismatch or missing issue.  Verify you have them set correctly on all you devices. 

 

-Dennis 

John_D
Here to help

That was it. Thank you for the quick reply  

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels