Is there a means to increate MX67 max throughput

Solved
MerakiMed
Getting noticed

Is there a means to increate MX67 max throughput

I have a large copy job and I noticed that maximum throughput is listed at 600Mbps. If I turned off some of the inspection services might it be possible to get closer to the 1Gbps? This is inside to outside traffic flow. Thank you. 

1 Accepted Solution
Brash
Kind of a big deal
Kind of a big deal

As per the datasheet, 600mbps is the maximum throughput of the mx67. There's no way to increase it.

https://meraki.cisco.com/product-collateral/mx-family-datasheet/

View solution in original post

5 Replies 5
Brash
Kind of a big deal
Kind of a big deal

As per the datasheet, 600mbps is the maximum throughput of the mx67. There's no way to increase it.

https://meraki.cisco.com/product-collateral/mx-family-datasheet/

alemabrahao
Kind of a big deal
Kind of a big deal

No way, the maximum throughput is 600Mbps.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Brash
Kind of a big deal
Kind of a big deal

As a side note, some people have reported getting higher than the maximum on newer firmware with all security features turned off. Definitely not a validated and expected behaviour though.

https://community.meraki.com/t5/Security-SD-WAN/MX68CW-Maximum-WAN-troughput/m-p/187457#M43900

MerakiMed
Getting noticed

Thanks for the speedy replies.

RaphaelL
Kind of a big deal
Kind of a big deal

If you put the slider to 600 ( which is the MAX ) It might go over 600Mbps. 

If you set it to Maximum-1 , it will actually limit it to Max-1. 

 

As Brash stated , some users have found that the MX are achieving speed higher than advertised ( as myself ).

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels