Meraki

CarlT

Hi All

Am I correct in saying the Inbound firewall rules on the rules page only apply to traffic coming in via the WAN interface?

If I have a router that sits on the LAN side of the firewall that routes traffic to the MX, I assume the inbound rules would not work?

Cheers

alemabrahao

You are correct, however if you want to block traffic between VLANs you can do this in the outbound rules and it will work.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

View solution in original post

alemabrahao

You are correct, however if you want to block traffic between VLANs you can do this in the outbound rules and it will work.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

alemabrahao

take a look at this.

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Firewall_Settings#What_is_a_trad...

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

Meraki

Community

Inbound firewall rules on Meraki MX - where do they apply

Inbound firewall rules on Meraki MX - where do they apply