cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

In Meraki Z1 & Z3 which LAN port works as secondary WAN port

SOLVED
Conversationalist

In Meraki Z1 & Z3 which LAN port works as secondary WAN port

Hi

 

Which LAN can we use as secondary WAN in Meraki Z1 or Z3 and how? As i have 2 internet up-links and i want when my primary uplink gets down than my secondary uplink starts working automatically. Please expedite support! 

1 ACCEPTED SOLUTION

Accepted Solutions
A model citizen

Re: In Meraki Z1 & Z3 which LAN port works as secondary WAN port

I've just done a quick check on our devices. On the Z1, there is no secondary port you can setup as a secondary WAN port.

Z1 Config page.PNG

However, on the Z3, you can configure Port 2 as a secondary WAN.

Z3 Config.PNG

Found this helpful? Give me some Kudos! (click on the little up-arrow below)

View solution in original post

11 REPLIES 11
Highlighted
Building a reputation

Re: In Meraki Z1 & Z3 which LAN port works as secondary WAN port

Sorry but there is no dual WAN functionality in either the Z1 or the Z3. They're teleworker devices so not really designed with that kind of functionality in mind. I know the MX60, MX64, MX65 and MX84 all do dual WAN and of course the bigger devices for sure.

 

Edit: But the Z1 and Z3 do support 3G/4G failover via USB modem

Conversationalist

Re: In Meraki Z1 & Z3 which LAN port works as secondary WAN port

Thank You for your kind reply but i also received following reply from one of the Technical Support member of CISCO Meraki:

Hi,

 

I believe you would use LAN port 4, but the configuration is exactly the same. You'll need to connect to the local configuration page of the Z1 and change one of the ports to Internet/WAN instead of LAN. Please take a look at that piece of documentation I sent you.

https://documentation.meraki.com/MX-Z/Firewall_and_Traffic_Shaping/MX_Load_Balancing_and_Flow_Prefer...

 

Kind regards,

 

James Earl

Cisco Meraki Technical Support

 

i have thoroughly studied the provided link but did not find any clear info as per claim of technical support member.

Kind of a big deal

Re: In Meraki Z1 & Z3 which LAN port works as secondary WAN port

I think @mmmmmmark is correct.  The key bit from that page is:

"On all other MX models, a LAN port can be repurposed into an Internet port for use as WAN 2."

 

You don't have an MX - you have a Z.

A model citizen

Re: In Meraki Z1 & Z3 which LAN port works as secondary WAN port

I've just done a quick check on our devices. On the Z1, there is no secondary port you can setup as a secondary WAN port.

Z1 Config page.PNG

However, on the Z3, you can configure Port 2 as a secondary WAN.

Z3 Config.PNG

Found this helpful? Give me some Kudos! (click on the little up-arrow below)

View solution in original post

Building a reputation

Re: In Meraki Z1 & Z3 which LAN port works as secondary WAN port

Thanks for checking @Mr_IT_Guy That's very good to know!

 

Conversationalist

Re: In Meraki Z1 & Z3 which LAN port works as secondary WAN port

Thank You Dear Mr_IT_Guy and to all others who has attended my inquiry and tried to solve it.

Here to help

Re: In Meraki Z1 & Z3 which LAN port works as secondary WAN port

Hi,

Have you test this configuration?

The Z3 brochure and the meraki support tell that the Z3 not have the secondary wan.

Thank

Regards

Kind of a big deal

Re: In Meraki Z1 & Z3 which LAN port works as secondary WAN port

 
Robin St.Clair | Principal, Caithness Analytics | @uberseehandel
A model citizen

Re: In Meraki Z1 & Z3 which LAN port works as secondary WAN port

I can post screenshots tonight.

Found this helpful? Give me some Kudos! (click on the little up-arrow below)
Kind of a big deal

Re: In Meraki Z1 & Z3 which LAN port works as secondary WAN port

I started to post a screen shot and then saw you had posted already . . . duh
Who is the guy on the left?
Robin St.Clair | Principal, Caithness Analytics | @uberseehandel
Getting noticed

Re: In Meraki Z1 & Z3 which LAN port works as secondary WAN port

Hi guys,

 

  I was checking my Wan connectivity on my Z1 and I also noted the Lan4 port setup :

z1_lan4

 

Not sure how does it behaves, but it's something we've being ask a lot!

 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.