Hello Gents,
I have an MX and i am looking to find a way on How we route internet and MPLS on the same port?
I think by using port 4 on Mx or adding a default route on Mx.
Port 4 is a Lan port. I meant any port in the MX which is not WAN 1 or wan2.
Is this possible? any idea, please.
Solved! Go to solution.
I'm not completely sure what you are trying to achieve. Are you wanting to give the MPLS circuit Internet access?
If you have two circuits, such as MPLS and Internet, you would normally plug them into separate WAN ports.
Here are some other topologies which might match what you want to do:
https://documentation.meraki.com/MX-Z/Deployment_Guides/MPLS_Failover_to_Meraki_Auto_VPN
https://documentation.meraki.com/MX-Z/Site-to-site_VPN/Configuring_Site-to-site_VPN_over_MPLS
Thank you for your reply ,
I am looking to have VRF configuration in Meraki when I am creating a vrf, it tells us what routes to import/export. Then assign that vrf to an interface. Once the vrf is attached to an interface, the switch/router creates a separate routing table to hold those routes.
Can we do this in Merak ?
Cisco Meraki equipment does not support VRFs (and probably never will).
hi,
but this would'nt work when using auto-vpn, or I'm wrong?