cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to check LAN intetrface config in MX64/MX450 Appliance ?

Highlighted
Here to help

How to check LAN intetrface config in MX64/MX450 Appliance ?

Hello All,

Can we check the LAN interface config in the MX64 or Mx450 appliance ?

2 REPLIES 2
Highlighted
Head in the Cloud

Re: How to check LAN intetrface config in MX64/MX450 Appliance ?

54F395B1-FD80-400E-9392-5F986994BC59.png

Go to Security and SD-WAN > Configure > Addressing and VLANs.  You’ll see the MX LAN interface config here

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Conversationalist

Re: How to check LAN intetrface config in MX64/MX450 Appliance ?

Hi SarthakRane

 

If you want to validate the port activation configuration and speed validation (10/100/1000) you can run it through Web Configuration

 

AdminMGMT.PNG

 

Or if you want to validate the logical settings (Vlans, IP Address, Mode Port [Trunk, Access]), you can run it through the Meraki dahboard, section Security & SD-WAN -> Addressing and Vlans.

 

CheckInterface.PNG

 


I hope the information is useful to you.

Regards.

 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.