How to check LAN intetrface config in MX64/MX450 Appliance ?

[SarthakRane]

Hello All,

Can we check the LAN interface config in the MX64 or Mx450 appliance ?

[DarrenOC]

 

Go to Security and SD-WAN > Configure > Addressing and VLANs.  You’ll see the MX LAN interface config here

[tannermoreno]

Hi SarthakRane

If you want to validate the port activation configuration and speed validation (10/100/1000) you can run it through Web Configuration

Or if you want to validate the logical settings (Vlans, IP Address, Mode Port [Trunk, Access]), you can run it through the Meraki dahboard, section Security & SD-WAN -> Addressing and Vlans.

I hope the information is useful to you.

Regards.