Products
Platform
General
Public groups
Hi
I'm trying to figure out how to change the speed of a port that on an MX84 is at 100mb but on its uplink the port is set to 1GB
Please Help
This can only be done on the Local Status Page of the Security Appliance.
https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...
It's likely auto-negotiating to 100Mbps due to a cable issue (e,g. broken pair), or the device on the other end is hard-set to 100Mbps.
Thx