Hi Team,
I have used the vMX100 Setup Guide for Microsoft Azure found below on the Meraki website:
https://documentation.meraki.com/MX/Installation_Guides/vMX100_Setup_Guide_for_Microsoft_Azure
Been bashing my head against a wall trying to get connectivity from my DC in the Sydney branch office to the DC in Azure.
My network configuration is as follows:
Sydney Branch Office Network
MX100
192.168.0.0/24 - Office LAN
192.168.0.8 - SydneyDC
vMX100 VNET
vMX100
10.10.0.0/16 - Supernet
10.10.0.0/24 - vMX100 Subnet
10.10.0.4 - vMX LAN IP
Infrastructure VNET
10.100.0.0/16 - Supernet
10.100.0.0/24 - Infrastructure Subnet
10.100.0.4 - AzureDC IP
I have the below networks set as "Local Networks" in the VPN settings of the vMX in Azure:
10.100.0.0/16
10.10.0.0/24
On the MX100 in Sydney, I can see it has 10.100.0.0/16 in the route table as well as 10.10.0.0/24.
I can ping the vMX100 IP 10.10.0.4 from the MX100 appliance without any issues. So the site-to-site VPN is working fine.
I have created a route table in Azure with the following settings:
Route: 192.168.0.0/24
Next Hop IP: 10.10.0.4
Subnet: 10.100.0.0/24
The route table is associated with the resource group in which the AzureDC resides. Below are some screenshots of my config in Azure. Meraki support are no help at all. Have tried a myriad of combinations and other 3rd party documentation online to no avail.
Is anyone able to assist in getting connectivity to the AzureDC host from my sydney branch office?