HA connection diagram

Solved
Luffy
Getting noticed

HA connection diagram

Hi,

 

I'd like to know whether this diagram works well or not.

 

 

 

HA.jpg

 

1. Juniper ----- MX side, Does it work well ?

2. MX ------ MS side, Does it also work well ?

 

Do you have any experience to build as this diagram ?

 

Thank you,

 

1 Accepted Solution
jdsilva
Kind of a big deal

Get rid of this connection:

 

image.png

 

That connection can do bad things and Meraki has removed it from the recommended topology.

 

https://documentation.meraki.com/MX/Deployment_Guides/NAT_Mode_Warm_Spare_(NAT_HA)#Recommended_Topol...

 

View solution in original post

3 Replies 3
jdsilva
Kind of a big deal

Get rid of this connection:

 

image.png

 

That connection can do bad things and Meraki has removed it from the recommended topology.

 

https://documentation.meraki.com/MX/Deployment_Guides/NAT_Mode_Warm_Spare_(NAT_HA)#Recommended_Topol...

 

Luffy
Getting noticed

Thanks,

 

Is everything good except for HA link ?

I will remove HA link between MX devices.

 

ciph3r
Getting noticed

There appears to be alot missing from this diagram. Where are these MX devices located? A datacenter? In pass through mode you can not port channel the devices directly. 

Get notified when there are additional replies to this discussion.