HA connection diagram

SOLVED
Luffy
Getting noticed

HA connection diagram

Hi,

 

I'd like to know whether this diagram works well or not.

 

 

 

HA.jpg

 

1. Juniper ----- MX side, Does it work well ?

2. MX ------ MS side, Does it also work well ?

 

Do you have any experience to build as this diagram ?

 

Thank you,

 

1 ACCEPTED SOLUTION
jdsilva
Kind of a big deal

Get rid of this connection:

 

image.png

 

That connection can do bad things and Meraki has removed it from the recommended topology.

 

https://documentation.meraki.com/MX/Deployment_Guides/NAT_Mode_Warm_Spare_(NAT_HA)#Recommended_Topol...

 

View solution in original post

3 REPLIES 3
jdsilva
Kind of a big deal

Get rid of this connection:

 

image.png

 

That connection can do bad things and Meraki has removed it from the recommended topology.

 

https://documentation.meraki.com/MX/Deployment_Guides/NAT_Mode_Warm_Spare_(NAT_HA)#Recommended_Topol...

 

Luffy
Getting noticed

Thanks,

 

Is everything good except for HA link ?

I will remove HA link between MX devices.

 

ciph3r
Getting noticed

There appears to be alot missing from this diagram. Where are these MX devices located? A datacenter? In pass through mode you can not port channel the devices directly. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels