Global client bandwidth shaper on the Meraki

Solved
RahulPrasadh
Getting noticed

Global client bandwidth shaper on the Meraki

How to configure a global client bandwidth shaper on the Meraki of 100MBPS/per client. With the exception of IPs in the range and ignoring the shaper and having unlimited bandwidth. Please share If there's any documentation that could support configuration.

1 Accepted Solution
RaphaelL
Kind of a big deal
Kind of a big deal

Hi ,


I assume you are using a Meraki MX. If so you can configure a global shaping of 100Mbps in the page : SD-WAN & traffic shaping

 

RaphaelL_0-1730815625384.png

 

 

To have some clients ignore the shapping you can create a Group Policy and do the same thing but configure : Ignore bandwidth 

 

RaphaelL_1-1730815707321.png

 

You can then apply that Group Policy to a VLAN or directly to clients.

View solution in original post

3 Replies 3
RaphaelL
Kind of a big deal
Kind of a big deal

Hi ,


I assume you are using a Meraki MX. If so you can configure a global shaping of 100Mbps in the page : SD-WAN & traffic shaping

 

RaphaelL_0-1730815625384.png

 

 

To have some clients ignore the shapping you can create a Group Policy and do the same thing but configure : Ignore bandwidth 

 

RaphaelL_1-1730815707321.png

 

You can then apply that Group Policy to a VLAN or directly to clients.

RahulPrasadh
Getting noticed

Creating a QoS rule with those subnets won't work? with unlimited bandwidth and high priority.

RaphaelL
Kind of a big deal
Kind of a big deal

Yes , that should also work. There are more than 1 way to achieve your goal

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels