cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Fortigate site-to-site VPN to Meraki MX84

Highlighted
Here to help

Fortigate site-to-site VPN to Meraki MX84

I would like to set-up a site-to-site vpn between a Fortigate FW (branch) to a MX84 (HQ). I know to add a peer to Non-Meraki peers section.

 

The problem i have is that the Fortigate is connected to a DSL and the ISP changes the assigned public ip address frequently.

 

Can this be configured any other way? 

4 REPLIES 4
Highlighted
Kind of a big deal

Re: Fortigate site-to-site VPN to Meraki MX84

Nope. IP only 😞

Here to help

Re: Fortigate site-to-site VPN to Meraki MX84

Are there any plans to allow 3rd party site-to-site vpn's when 3rd party FW's not on static public ip address? Customer can currently do this with their Fortigate. Why not allow FQDN name in the peer configuration.

Highlighted
Getting noticed

Re: Fortigate site-to-site VPN to Meraki MX84

Even if you use a DynamicDNS or similar @jdsilva ?

Highlighted
Kind of a big deal

Re: Fortigate site-to-site VPN to Meraki MX84


@GuilhermeMacedo wrote:

Even if you use a DynamicDNS or similar @jdsilva ?


Unfortunately, that doesn't matter. The Non-Meraki VPN config only takes an IP, not a name. 

 

image.png

 

 

For example, if I enter this:

 

image.png

 

Then I get this error:

 

image.png

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.