Firmware 18.211.2 - Ping

Solved
JozefMocke
Here to help

Firmware 18.211.2 - Ping

Good day - not sure if anyone else notice the increase in ping response since upgrading to firmware 18.211.2. Our Hub Spoke setup is done with MX250 being the HUB and 6 X MX67 as Spokes. The MX250 hub was upgraded to the new firmware 6am 8 June and the Spokes was upgraded 9 June 8am. Below is what I see on PRTG. I have a case open (Case no. 11833637)

but just need to find out if this is normal. Thank you.ping-Meraki.png

1 Accepted Solution
rhbirkelund
Kind of a big deal
Kind of a big deal

I'm not neccessarily saying there isn a bug, and this wasn't on MX18.2 (or even MX18 for that matter).

 

I'm just saying that after I rebooted my upstream router, my MX ping statistics came back to normal...

rhbirkelund_2-1718865238660.png

 

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.

View solution in original post

3 Replies 3
rhbirkelund
Kind of a big deal
Kind of a big deal

I'm not neccessarily saying there isn a bug, and this wasn't on MX18.2 (or even MX18 for that matter).

 

I'm just saying that after I rebooted my upstream router, my MX ping statistics came back to normal...

rhbirkelund_2-1718865238660.png

 

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.

Thank you will try tonight the reboot.

e2
Conversationalist

Hi! Did you reboot your router?

Ivan Ypes
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels