Dual concurrent wan uplinks on z3

PrayankC
Just browsing

Dual concurrent wan uplinks on z3

Can we define flow preferences on z3 such that both the uplinks can be used at the same time based on the destination ?

1 REPLY 1
Adam
Kind of a big deal

If you have redundant uplinks you'd just want to setup Load Balancing at Security Appliance>Traffic Shaping. 

 

Flow preference are only really designed to be used if you want traffic to use one of the WAN connections over the other.  A typical example of this may be your VOIP traffic.  Maybe WAN1 is an ultrafast low latency pipe and WAN2 is a slower high latency pipe.  Load balancing internet over both of those is fine but you may want your phone traffic to prefer WAN1.  In that case you'd setup a flow preference for your VOIP traffic with destination and WAN1.  

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels