cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Dual MX100s pass through mode

New here

Dual MX100s pass through mode

The customer has to Meraki MX100s. One here in HQ and the other in Phoenix. Both in PassThrough mode. They have teleworkers gateways for remote users with VPN tunnels on the HQ MX. They want to shut down things but when they do remote users lose connection. I had them change both MXs to routed mode and then shutdown Phoenix. It works that way partially. Some things work some not. I can’t understand why shutting down one in Phoenix  is disrupting communications. All the telework gateways are registered to the one in HQ.  The two are connected via VPN tunnel Both are hubs. Is that a problem? I don’t quite understand how this pass-through mode works with these two devices

2 REPLIES 2
Kind of a big deal ww
Kind of a big deal

Re: Dual MX100s pass through mode

what is not working? it was probably a concentrator with some kind of routing to services on the hq's? https://documentation.meraki.com/MX/Deployment_Guides/VPN_Concentrator_Deployment_Guide

Kind of a big deal

Re: Dual MX100s pass through mode

Are they perhaps accessing a service in Pheonix via the HQ MX?

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.