Does Meraki MX support Source base route by subnet not a whole vlan ?

[EricZ]

We want to route some specific ip addresses to a destination ,but i only found meraki can do this by whole VLan ? Is there a way to realize this requirement ?

[KarstenI]

You can also configure it for a static route that is available on the MX. This could be a specific subnet in your environment. But be aware that this is only a source-based default route, not something like PBR on other platforms.

[EricZ]

But as i see ,static route can only be set up by destination ?

[KarstenI]

The static route will become the source subnet in the source-based routing dialog.

[EricZ]

But in source-based routing ,the source can only be a whole VLAN ,can input lie  172.16.226.0/26

[PhilipDAth]

Alas you are correct.

https://documentation.meraki.com/MX/Networks_and_Routing/Source_Based_Default_Routing

[EricZ]

It's not flexiable for us realize some demands.

[Brash]

As said above, you're correct - you cannot source specific IP's or subnets.

It is per-VLAN

"Source-Based Default Routing is a per-VLAN default route feature."
Source Based Default Routing - Cisco Meraki Documentation