Does MX device can support dual active ?

SOLVED
kuni
Getting noticed

Does MX device can support dual active ?

Main circuit : MPLS

Backup circuit : Internet (Site-to-Site VPN)

 

In this case, Does a MX can support dual active ?

I'd like to send traffic both MPLS and Internet as active-active.

Is it possible ?

 

1 ACCEPTED SOLUTION

LoadBalancing.PNG@BrechtSchamp is on-point here. If you have 2 WAN up-links, then you can enabled load balancing and traffic shaping will steer to whatever WAN you decide via Flow Preferences. 

 

 
CMNO, CCNA R+S

View solution in original post

4 REPLIES 4

Thank you for your answer.

You mean that to use dual active, It needs to set dual WAN, right ?

BrechtSchamp
Kind of a big deal

I'm not sure what you mean. You can load balance between two connected WAN connections. The details about how you can finetune that are in the link I posted before. If you don't have two WAN connections, you can't load balance.

LoadBalancing.PNG@BrechtSchamp is on-point here. If you have 2 WAN up-links, then you can enabled load balancing and traffic shaping will steer to whatever WAN you decide via Flow Preferences. 

 

 
CMNO, CCNA R+S
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels