DHCP RELAY ISSUES

DHCP_RELAY_
Comes here often

DHCP RELAY ISSUES

DHCP RELAY NOT WORK, WHEN THERE IS OTHER HIGHEST ID VLAN THAN THE VLAN OF RELAY

3 REPLIES 3
PhilipDAth
Kind of a big deal
Kind of a big deal

If you want to make a bug report then you'll need to open a support case.

NolanHerring
Kind of a big deal

Are you referring to this?

https://documentation.meraki.com/MX/DHCP/Configuring_DHCP_Relay

Note: The MX is always going to use the subnet from the highest VLAN as the source subnet when it's sending the request to the DHCP server. If the VLAN is not shared across the VPN then the request will be dropped as it is not permitted through the tunnel.
Nolan Herring | nolanwifi.com
TwitterLinkedIn

Thanks for your reply.

Yes, It is (The MX is always going to use the subnet from the highest VLAN as the source subnet when it's sending the request to the DHCP server).


Actually, I have two vlan (ID:163 , 100) in the Addressing & VLANs, and these have in the dhcp relay and shared across the VPN. But only is working DHCP relay en highest VLAN (163), in dhcp relay vlan (100) no work.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels