Create Alert When Traffic WAN Port Meraki MX Reach 80% from The Bandwidth

[Lathif]

Hi everyone,

Is it possible on meraki dashboard create an alert when the utilization of wan port meraki mx reach 80% from the bandwidth wan port?

For example:

I am using meraki MX84 with 100 Mbps Bandwidth on port wan1.

When traffic of port wan1 reach 80 Mbps, meraki dashboard will sent alert to me via email.

Thank you,

Lathif

[jimmyt234]

No, but I am sure any SNMP platform of your choosing could easily do this job.

[alemabrahao]

By using the link natively, you cannot generate this alert, only Network usage exceeds as shown in the image.

I believe that only via SNMP monitoring.

https://documentation.meraki.com/General_Administration/Monitoring_and_Reporting/SNMP_Overview_and_C...

[RaphaelL]

I will ( someday ) be possible with MI. At the moment the alert is only visible on the dashboard ( WAN Health -> High Usage ) https://documentation.meraki.com/MI/MI_WAN_Health

[RaphaelL]

Or ! You could be really creative.  

1- Create network tags for your WAN speeds. Eg : Network 1 : TAGS : ['Wan1-100-100',Wan2-50-50']  That would indicate Wan 1 Speed of 100Mbps Up and 100Mbps Down. Same for Wan2.

2- Insight  -> Alerts -> Create an alert for EVERY single WAN Speeds by selecting the appropriate network tag : 

If you only have 2-3 ISP with 1-2 speeds , that can be done easily. Otherwise it's hard to manage and maintain.