Configure Armis OID in Dashboard for SNMPv3

[Twitch]

Hello to the crew - We recently configured SNMPv3 for our networks under Network-Wide > General. The receiving device is an Armis cybersecurity appliance. The Armis is reporting that the SNMP connection "partially succeeded." Armis supporting is asking that we configure the Armis OID in the Meraki dashboard for the SNMP connection to fully-establish with the Armis appliance.

However, after looking through the available SNMPv3 configuration options that are available in the Meraki dashboard, I do not see an option to configure the OID of an external device, nor do I see any mention of adding an OID in any of the SNMP Meraki documentation.

Is this possible? If so, where is the config option to add it?

Thanks!

Twitch

[PhilipDAth]

There is no such option.

[VictorYang · Accepted solution]

Unfortunately, at the moment meraki device only supports OIDs within the subset of the following MIBs:

SNMPv2-MIB .1.3.6.1.2.1.1
IF-MIB .1.3.6.1.2.1

It cannot be modified to support additional OIDs

[Twitch]

Thanks guys. I appreciate the quick responses.