Client VPN using WAN2

[GaryShainberg]

Anyone found a way to allow all the inbound client VPN traffic to terminate on the WAN2 port of an MX.

I am sure you used to be able to do this but can not find the option.

And I being thick or has this been removed?

TIA

[Jerome_EVAGroup · Accepted solution]

Hi @GaryShainberg 

I think you will need to set WAN2 as primary link to do so.

[ww]

https://community.meraki.com/t5/Security-SD-WAN/Client-VPN-Using-WAN-2-Secondary/m-p/19086