Client VPN from public hotspots - port issues

jc_rm
Conversationalist

Client VPN from public hotspots - port issues

I'm hoping someone might have some suggestions. We're finding that the client VPN is often not useful in the exact situation we want it in, when connecting from public hotspots. The cause appears to be that more and more of the coffee shops, transit terminals, etc are blocking udp ports entirely and often only allowing ports 80 and 443. 

 

Is there a way to configure the client VPN to communicate over 443? Without this the VPN is rather useless.

 

Thanks

 

Jason

2 Replies 2
LudwigD
Getting noticed

facing the same problem here. So also interested in a solution... 

 

Thanks,

 

LD

PhilipDAth
Kind of a big deal
Kind of a big deal

There is no way to change the ports being used by the client VPN.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels