Meraki

Community

Changing port configuration from Half Duplex to Full Duplex

Solved

Is there a way to change the port configuration on a Cisco MX68CW from half duplex to full duplex?

1 Accepted Solution

Yes. Via the local status page: https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

- Ex community all-star (⌐⊙_⊙)

View solution in original post

2 Replies 2

Yes. Via the local status page: https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

- Ex community all-star (⌐⊙_⊙)

Using the Local Status Page yes. They're all set to auto by default.

Welcome to the Meraki Community!

To start contributing, simply with your Cisco ID. If you don't yet have a Cisco ID, you can .

Labels

3rd Party VPN 133
ACLs 69
Auto VPN 226
AWS 28
Azure 54
Client VPN 312
Firewall 671
Other 462