Blocking countries on Z3

SOLVED
eweisman
Conversationalist

Blocking countries on Z3

How do you block countries in the Z3?

 

The normal path for an MX is Security & SD-WAN --> Configure --> Firewall --> Layer 7. 

I thought the equivalent for the Z3 would be Teleworker Gateway --> Configure --> Firewall --> Layer 7. However, there is no country section under Layer 7 Firewall rules. 

1 ACCEPTED SOLUTION
HaniAbuelkhair4
Getting noticed

In order to block per country you will need an Advance security licenses.

But in Z3 this licenses is not available, so you cant do that using the Z3. 

View solution in original post

1 REPLY 1
HaniAbuelkhair4
Getting noticed

In order to block per country you will need an Advance security licenses.

But in Z3 this licenses is not available, so you cant do that using the Z3. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels