BGP to Microsoft RAS server

SOLVED
Skeating
Here to help

BGP to Microsoft RAS server

Hello

 

I am setting up a temporary Microsoft RAS behind an MX68 Meraki firewall. I m using NAT to go from an IP on the MX to an interior RAS. What type of BGP do I need to setup on the MX in order to facilitate this?

1 ACCEPTED SOLUTION
ww
Kind of a big deal
Kind of a big deal

I dont know your setup. A server could use the default gateway to send all traffic. If the default gateway(meraki mx?) knows all the routes then you dont need to do anything

View solution in original post

3 REPLIES 3
ww
Kind of a big deal
Kind of a big deal

Asuming you run the mx in routed mode. Then this mx cant do bgp

 

Why you need bgp for this case? Cant use a static route?

Isn't BGP needed to "advertise" the connection to the RAS?

ww
Kind of a big deal
Kind of a big deal

I dont know your setup. A server could use the default gateway to send all traffic. If the default gateway(meraki mx?) knows all the routes then you dont need to do anything

View solution in original post

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels