An American deploying an MX67C in the UK

movingonup
Conversationalist

An American deploying an MX67C in the UK

I'm hoping to get some info on deploying an MX67C in the UK.

Right now, I have 120+ MX67Cs deployed throughout the US and each one has a Verizon SIM card in it. I've been told that Verizon isn't "certified" to work with these devices and there has been some headaches from time to time because of that. It's been suggested a few times that I switch to AT&T (this is a setup that was in before my time so it's an uphill battle to do that).

That said, we're looking to expand our work into the UK and that means deploying MX67Cs with LTE. Which service is recommended for these? Do I need to purchase a special license/edition of the MX67C to use it in the UK? Is there anything I should be aware of that's different or notable between the US and UK?

Thanks.

3 Replies 3
PhilipDAth
Kind of a big deal
Kind of a big deal

Typically the US uses a special version, and all the rest of the world uses the same system.

 

So for almost every country in the world except the US, you use (WW=world wide):

MX67C-HW-WW

@PhilipDAth  is the special US version imperial while the rest of the world uses the metric version 😂

 

 

Inderdeep
Kind of a big deal
Kind of a big deal

@movingonup : well i think you need to check the ISP supported for SIM cards there in UK. Below are the vendors supported worldwide, For UK i think BT and Orange is supported. 

Inderdeep_0-1628602217030.png

Rest all docs

https://documentation.meraki.com/MX/MX_Overviews_and_Specifications/MX67_and_MX68_Datasheet

https://cloudcontrolled.uk/wp-content/uploads/2019/02/MX67_MX68-Installation-Guide.pdf

 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels