Access MX local Mgmt page through MPLS VPN remote site.

Solved
Ahmed_Fathy
Here to help

Access MX local Mgmt page through MPLS VPN remote site.

Can I access MX local Mgmt page remotely through MPLS connected on MX LAN ports (ping works fine) or should the endpoint (ex: laptop, PC.....) used for Mgmt be directly connected and in the same LAN...….. or as long as there is a reachability to MX then i can access its local web Mgmt page? and if not,.... is there any workaround ?

 

note: MPLS is reachable to MX through static route. 

1 Accepted Solution
Ryan_Miles
Meraki Employee
Meraki Employee

Do you have remote device status pages enabled? If so, you should be able to reach the local status webpage via any reachable/route-able LAN IP on your MX.

 

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

View solution in original post

1 Reply 1
Ryan_Miles
Meraki Employee
Meraki Employee

Do you have remote device status pages enabled? If so, you should be able to reach the local status webpage via any reachable/route-able LAN IP on your MX.

 

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels