How would 1 access the local interface of the MX when sitting behind the MX? So if the MX ip is 192.168.100.1 and the client has an ip of 192.168.100.10 should be able to browse to 192.168.100.1 or do I need to enable anything in the dashboard? Right now the Local device status page is enabled but neither http://192.168.100.1 or https://192.168.100.1 connect to the interface. Do I need to also enable the remote device status page?
The IP varies for different MX models but you can look into the above document and get more information on how to do it via IP. It is much easier to leave the client on dhcp and navigate via your browser and make sure you are directly connected to MX and not connected to any WIFI network on your client