Access MX Local Interface

mumbles202
Comes here often

Access MX Local Interface

How would 1 access the local interface of the MX when sitting behind the MX?  So if the MX ip is 192.168.100.1 and the client has an ip of 192.168.100.10 should be able to browse to 192.168.100.1 or do I need to enable anything in the dashboard?  Right now the Local device status page is enabled but neither http://192.168.100.1 or https://192.168.100.1 connect to the interface.  Do I need to also enable the remote device status page?

1 Reply 1
bmehta
Meraki Alumni (Retired)
Meraki Alumni (Retired)

Hello,

You can access local status page of the MX via http://mx.meraki.com , http://wired.meraki.com
https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Me...

The IP varies for different MX models but you can look into the above document and get more information on how to do it via IP. It is much easier to leave the client on dhcp and  navigate via your browser and make sure you are directly connected to MX and not connected to any WIFI network on your client

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels