Hello, I have a situation where I need service for a short term.. about 3 months. I am looking to use 2 Internet access at about 50 MB each, into a MX to give me a combined BW of abut 100MB. Is this possible on the MX and do I need to have any special config on the MX?
Solved! Go to solution.
@Joels2019 Rightly said by @DarrenOC and the quick answer is yes to push the traffic on both links as load balanced
@Joels2019 : if you talking about smart bonding then have a look
https://community.meraki.com/t5/Security-SD-WAN/Smart-link-bonding-in-MX/m-p/100920#M25288
Hi @Joels2019
you can utilise both WAN links on your mX for load balancing
Special config: tick box to enable load balancing to utilise both links
Thanks for the feed back. I will try this with my customer as a fix for this short term situation. Thanks.
@Joels2019 Rightly said by @DarrenOC and the quick answer is yes to push the traffic on both links as load balanced
Thanks Inderdeep for the input. This should effectively give me the aggregate BW of both these accesses.